STAINLESS STEEL DELI CONTAINER — PROTOTYPE DRAWING
Cross-Section Profile View · All dimensions in mm (inches in parentheses) · Material: 304 SS · Wall: 0.8mm / 22ga
⊥ CL
32 oz (PRIMARY)
950 ml
Ø 117mm (4.61")
Ø 89mm (3.50") BASE
142mm (5.59")
~5.6°
TAPER
DETAIL A — RIM PROFILE (5×)
0.8mm wall
snap bead
(lid seats here)
A
t = 0.8mm
22ga 304 SS
76mm (3.0")
16 oz
470 ml
43mm (1.7")
8 oz
240 ml
★ ALL 3 SIZES SHARE Ø 117mm RIM — COMPATIBLE WITH STANDARD PLASTIC DELI LIDS ★
NOTES:
1. Rim diameter must match standard plastic deli container (Karat/Cambro 117mm series) exactly — lid compatibility is the critical constraint.
2. Rolled rim bead profile to be confirmed against actual plastic lid sample. Recommend providing 10× physical lid samples to manufacturer for fit verification.
3. Base diameter ~89mm is estimated from standard taper — confirm against physical container measurement. Wall gauge (22ga / 0.8mm) open to mfr recommendation for structural integrity.
4. Inspiration: existing stainless steel stackable cups — same construction method adapted to deli container form factor (see attached photo).
TITLE
Stainless Steel Deli Container
32oz Prototype · 16oz & 8oz Bonus
MATERIAL / SPEC
304 Stainless Steel
22 gauge / 0.8mm wall (TBD)
Food-grade, electropolished finish
DRAWING INFO
DWG: SS-DELI-32-01
REV: 01 | SCALE: NOTED
UNITS: mm | ANGLE: 1st
PROTOTYPE — NOT FOR PRODUCTION